REM polishing | REM Surface Engineering

Additive Manufacturing and Gears

Posted by Danny Estrada on Wednesday, September 7th, 2022 in

Binder jetting The 3DPC started the tour with binder jetting/binder jet-like companies 3DEO and Desktop Metal. Both companies were a […]...

A Comparison of Surface Roughness Measurement Methods for Gear Tooth Working Surfaces

Posted by Mark Michaud on Friday, October 25th, 2019 in

Surface roughness is a critical parameter for gears operating under a variety of conditions. It directly influences friction and contact temperature, and therefore has an impact on various failure modes such as macropitting, micropitting and scuffing...

Vibratory Media Compositions vs. Attrition and Density

Posted by Bill Nebiolo on Tuesday, October 1st, 2019 in

The third in our multi-part series on vibratory processing of gears is focused on understanding how media of different compositions have varying attrition rates and densities, and why these are important in vibratory finishing of gears. ...

AN ANALYSIS OF A LOSS OF LUBRICATION TEST OF ISOTROPIC SUPERFINISHED GEARS WITHOUT BLACK OXIDE COATING

Materials Matter : Surface Finishing Rotorcraft Gearing

Posted by Danny Estrada on Wednesday, October 3rd, 2018 in

Rotorcraft gearboxes are designed with the utmost precision to withstand the tremendous demand and loads required to convert thousands of horsepower and RPM into hundreds of RPM and lift torque....

Comparative Corrosion Characteristics of Gear Steels 1

Comparative Corrosion Characteristics of Ground and Superfinished Gear Steels

Posted by David Smith on Friday, November 15th, 2013 in

The described effort was undertaken to assess the impact of the isotropic superfinishing (ISF®) process on the corrosion resistance of a variety of gear steels....