Isotropic Superfisning | REM Surface Engineering

Chemical-Mechanical Surface Polishing to Improve Mechanical Performance and Corrosion Resistance

Posted by Danny Estrada on Wednesday, February 22nd, 2023 in

The surface finishing process was performed by REM Surface Engineering, using their Extreme ISF Process®. This process combines a chemical polishing (CP) operation followed by […]...

Vibratory Bowl Gear Polishing Inefficiencies

Posted by Danny Estrada on Tuesday, May 31st, 2022 in

Media Volume Inefficiency The most common inefficiency in isotropic finishing is a low media level. Media is a wear item […]...

Metal Finishing for 3D Printed Parts Webinar – Part 7 – OPEN IMPELLER

Posted by Danny Estrada on Monday, July 6th, 2020 in

...

Metal Finishing for 3D Parts Webinar – Part 2

Posted by Danny Estrada on Monday, July 6th, 2020 in

...

Metal Finishing for 3D Printed Parts Webinar – Part 1

Posted by Danny Estrada on Monday, July 6th, 2020 in

...

ISF Surface Versus Machined Surface

Posted by Danny Estrada on Wednesday, March 26th, 2014 in

Why ISF® Surfaces are superior to machined surfaced: As the load of the mating surface is increased, the lubrication film becomes thinner, and the asperities of the machine surface contact each other resulting in plastic deformation, metal debris an...